Fiberglass Pipe Insulation
Brand : Owens Corning / Johns Manville
- SKU:
- 0100000
- Unit Of Measure:
- Per 3ft Section
- Size is NOT Diameter:
- Refer to Sizing Instructions
Fiberglass Pipe Insulation covering is intended as a thermal insulation for both hot and cold service piping from -20°F to 1000°F. The pipe insulation is molded from heavy density resin bonded glass fibers that come in 3 foot long hinged sections. The fiberglass is wrapped with white All-Service Jacketing with a self-sealing lap (ASJ/SSL) for a quick and secure installation. Each 3 foot section of commercial hot and cold pipe insulation comes with a butt-strip tape (matching the white ASJ jacketing) that is used to connect two sections of fiberglass pipe insulation covering together.
Fiberglass Pipe Wrap Uses:
- Domestic Hot & Cold Water Pipes
- Hot Water Heating Pipes
- High Temperature Pipes
- Dual Temperature Pipes
- Steam Pipes (Low to High Pressure)
- Condensate Lines
- Refrigerated / Chilled Liquid Pipes
Choosing The Correct Size: There are two sizes you need to choose when ordering fiberglass pipe insulation, the "Pipe Size" and the "Insulation Thickness". The insulation thickness is the wall thickness of the fiberglass which varies from 1/2" up to 3" thick. For help selecting a fiberglass pipe insulation thickness see our Fiberglass Thickness Guide To determine which Pipe Size to order please see the link below (Note: Pipe Size of this fiberglass pipe wrap is NOT the same as the pipe diameter):
CLICK HERE FOR PIPE SIZING CHART AND INSTRUCTIONS
Installation Instructions:
To install hot and cold pipe covering, simply open the hinged part of the commercial pipe insulation and place the opening over the pipe. The fiberglass piping insulation covering will self-close around the pipe. Once the fiberglass is fitted snug around the pipe, peel the release paper from the self-sealing lap and press the ASJ/SSL jacket closed from the middle towards the edges of the pipe insulation. Make sure to rub the jacket closed to ensure a secure seal. Seal two sections together with a piece of butt strip tape making sure to rub the tape to create a secure seal. Seal two sections of fiberglass pipe covers together with a piece of butt strip tape making sure to rub the tape to create a secure seal. Additional ASJ MAX Tape is recommended for large projects and projects that require multiple cuts of the insulation. Use of PVC Fitting Covers for elbows, tees, unions and other pipe fittings should be installed after installing fiberglass pipe insulation.
For more information: Fiberglass Pipe Insulation Datasheet
VIDEO: HOW TO INSTALL FIBERGLASS PIPE INSULATION
White ASJ Jacketing: A large majority of common size fiberglass pipe wrap insulation we ship is the new ASJ Max / HP ULTRA pipe insulation while some larger sizes and (3 x 1/2, 3-1/8 x 1/2, 4 x 1/2, and 4-1/8 x 1/2) will be Johns Manville Micro-Loc HP. The new ASJ Max / HP ULTRA jacketing has a poly top-coat over the ASJ paper which makes it easier to wipe clean and slightly water resistant (cannot be left exposed outdoors).
NOTE: Each unit is 3 linear feet of pipe covering. For example, if you need 9 linear feet, you only need to order 3 units.
BUY INSULATION PRODUCTS.COM ONLY SELLS AMERICAN MADE FIBERGLASS PIPE INSULATION PRODUCTS. DEPENDING ON SHIP TO LOCATION AND/OR PIPE SIZE WE MAY SHIP OWENS CORNING ASJ MAX OR JOHNS MANVILLE MICRO-LOC HP / HP ULTRA INSULATION. PLEASE CONTACT US WITH ANY QUESTIONS.
|
|
|
 |
|
|
|
|
|
|
-
They don't disappoint
We always get our product correctly and fast! Thank you so much!
**Karen, thank you for all of your business, we greatly appreciate it! ~ BIP -
Quality Product
I have bought pipe wrap from big box stores , as a contractor I can tell your products are built better, with better selection in pipe size , the adhesive to seal the wrap is better and does not come undone like other wraps. I like the fact you included extra tape to seal the wrap. I use it on steam systems
*Lisa, we are glad that you are happy with the quality of the product, let us know if you need anything else. ~BIP -
Great product and service
I had asbestos removed from my steam pipes. I called this company about fiberglass replacement and a real person answered the phone and gave helpful information. I found it easy to cut to size with a kitchen knife and easy to install.
*Norm, I am glad you had a good shopping experience with us, thank you again for your compliments ~ BIP -
Piece of Cake!
I had read that I should insulate my steam pipes in our new house and was expecting a big project to get it done. This product made it a cinch! Just measured my pipes ahead of time so I knew what to order. The pieces are super easy to install... Individual 3' sections are easy to work with, slide them into place, peal the adhesive strip and seal. Done. Was done in a couple hours.
**David, we are glad that the insulation project went smoothly for you ~ BIP -
Great steam pipe product
This item was shipped extremely quickly and is a GREAT product.! We recently had asbestos removed from our steam pipes and used this product to insulate our 2" iron pipes. This was VERY easy to install; the tape held it tight to the pipes. I had to cut smaller pieces and the paper wrapping even held with no issues so far. Tape to "connect" pieces together was included at no extra price. It is NOT itchy at all, even after cutting to trim, and was very easy to trim. We bought the 1" thick insulation and I feel the price is a great value for the Owens-Corning brand.
** We are pleased that your insulation project went well! ~ BIP -
Better than big box!!
Don't bother with the local big name stores. Shipping is so fast, cheap and convenient, that ordering on line is a no brainer. The product surpasses my comparison of locally available insulation supplies.
Overall a great source for DIY's.
**Steve, thank you for the referral. The big box stores are good on most items, just not on pipe insulation. ~ BIP -
Easy to install and effective
I replaced some old asbestos insulation with the fiberglass and found that the existing fiberglass on some of the pipes was thinner than recommended, so did that as well.
Installation was very easy and the results are very professional in appearance. Would recommend to anyone wishing to upgrade their insulation. Simply peel the cover from the adhesive edge and wrap it tight.
Delivery was very fast. -
don't hesitate, order here
great products and great service.
they also include joint tape with each section
I ordered on Sunday night, it shipped on Tuesday and I had it on Wednesday.
I tried the local H.Depot version and it was a waist of $ (thinner fiberglass, cheaper paper, sealing tape didn't stick, no joint tape.
take a few moments to order here.
-
Fiberglass Pipe Insulation on Steam Pipes
User interface with website is excellent, it provides smooth navigation to select the pipe size and insulation thickness. The site is very informative with illustrations and tables to ensure the PVC fitting covers match the pipe and insulation thickness. Customer service is a call away and they handled my call immediately. I received the materials in couple of days after the order. Once you get the material you will easily install the straight runs. The fittings are a little more challenging for a DIYer. The final results look great. As others have said, don't bother going to Big Box.
*Rick, thank you for the compliments! ~ BIP
-
Excellent Service.
My steam pipe insulation arrived within days in a sturdy box. I was very pleased at the value.
-
Easy to install , Do it Yourself.
I have an old single pipe steam heating system. I had the asbestos insulation professionally removed and wanted to save some money by re-insulating the pipes myself. This product is easy to install and produces professional looking results.
-
Lap Tape Adhesive
The product preforms as expected and was shipped to us with great regard to ensure no damage was done. Many times boxes are damaged and ends of insulation are destroyed, not the case with this company! The adhesive on the lap tape joints is less than stellar however. After installation many of the sections opened up again and some areas required additional adhesive or re taping with another product to keep sealed. Overall a good product.
*Andy, we passed along your complaints about the laps opening to Owens Corning as this is not common with their products ~ BIP
