Fiberglass Pipe Insulation
Brand : Owens Corning / Johns Manville
- SKU:
- 0100000
- Unit Of Measure:
- Per 3ft Section
- Size is NOT Diameter:
- Refer to Sizing Instructions
Fiberglass Pipe Insulation covering is intended as a thermal insulation for both hot and cold service piping from -20°F to 1000°F. The pipe insulation is molded from heavy density resin bonded glass fibers that come in 3 foot long hinged sections. The fiberglass is wrapped with white All-Service Jacketing with a self-sealing lap (ASJ/SSL) for a quick and secure installation. Each 3 foot section of commercial hot and cold pipe insulation comes with a butt-strip tape (matching the white ASJ jacketing) that is used to connect two sections of fiberglass pipe insulation covering together.
Fiberglass Pipe Wrap Uses:
- Domestic Hot & Cold Water Pipes
- Hot Water Heating Pipes
- High Temperature Pipes
- Dual Temperature Pipes
- Steam Pipes (Low to High Pressure)
- Condensate Lines
- Refrigerated / Chilled Liquid Pipes
Choosing The Correct Size: There are two sizes you need to choose when ordering fiberglass pipe insulation, the "Pipe Size" and the "Insulation Thickness". The insulation thickness is the wall thickness of the fiberglass which varies from 1/2" up to 3" thick. For help selecting a fiberglass pipe insulation thickness see our Fiberglass Thickness Guide To determine which Pipe Size to order please see the link below (Note: Pipe Size of this fiberglass pipe wrap is NOT the same as the pipe diameter):
CLICK HERE FOR PIPE SIZING CHART AND INSTRUCTIONS
Installation Instructions:
To install hot and cold pipe covering, simply open the hinged part of the commercial pipe insulation and place the opening over the pipe. The fiberglass piping insulation covering will self-close around the pipe. Once the fiberglass is fitted snug around the pipe, peel the release paper from the self-sealing lap and press the ASJ/SSL jacket closed from the middle towards the edges of the pipe insulation. Make sure to rub the jacket closed to ensure a secure seal. Seal two sections together with a piece of butt strip tape making sure to rub the tape to create a secure seal. Seal two sections of fiberglass pipe covers together with a piece of butt strip tape making sure to rub the tape to create a secure seal. Additional ASJ MAX Tape is recommended for large projects and projects that require multiple cuts of the insulation. Use of PVC Fitting Covers for elbows, tees, unions and other pipe fittings should be installed after installing fiberglass pipe insulation.
For more information: Fiberglass Pipe Insulation Datasheet
VIDEO: HOW TO INSTALL FIBERGLASS PIPE INSULATION
White ASJ Jacketing: A large majority of common size fiberglass pipe wrap insulation we ship is the new ASJ Max / HP ULTRA pipe insulation while some larger sizes and (3 x 1/2, 3-1/8 x 1/2, 4 x 1/2, and 4-1/8 x 1/2) will be Johns Manville Micro-Loc HP. The new ASJ Max / HP ULTRA jacketing has a poly top-coat over the ASJ paper which makes it easier to wipe clean and slightly water resistant (cannot be left exposed outdoors).
NOTE: Each unit is 3 linear feet of pipe covering. For example, if you need 9 linear feet, you only need to order 3 units.
BUY INSULATION PRODUCTS.COM ONLY SELLS AMERICAN MADE FIBERGLASS PIPE INSULATION PRODUCTS. DEPENDING ON SHIP TO LOCATION AND/OR PIPE SIZE WE MAY SHIP OWENS CORNING ASJ MAX OR JOHNS MANVILLE MICRO-LOC HP / HP ULTRA INSULATION. PLEASE CONTACT US WITH ANY QUESTIONS.
|
|
|
 |
|
|
|
|
|
|
-
Most efficient Insulation for the money
Buy Insulation Products offers the best priced insulation, fast shipping, and quality insulation. 0 issues with any of the insulation we ordered and seems to hold up quite well.
-
Just what we needed
Excellent products at a great price!
-
Very satisfied
Product even came with tape for joints, great insulation for hot water lines
-
Great Company
Great prices. Top brands of products. Very easy to place orders. Great communication. Pay the the shipping the cost is still less than the others.
-
Quality and Value plus Outstanding Service
The insulating rolls that I have purchased are just great . The sizes and thickness options make for perfect fit resulting in perfect fit with little or no heat loss. Easy to cut if needed and provides a neat tidy and clean look.
A must have product for anyone with a steam heating system -
Very easy to use and high quality
Fits all three pipe sizes I used snuggly. The split design with sealing tape made installation very easy and professional looking. Insulation is a tight design so if you need to cut lengths it is easy and does not compress or come apart.
-
Great Insulation for Steam Radiator Pipes
I just purchased an old brownstone with a steam radiator system. The furnace tech advised me to insulate the main radiator pipes in the cellar. After looking at inferior options, I found this tubular fiberglass insulation at buyinsulationproductstore.com. It was easy to calculate the insulation size I needed for my 2" cast iron pipes. The product arrived quickly and was easy to install. I ordered additional tape, but probably only need the tape that came with the 13 rolls I ordered. Now, I just need to install insulated elbows and tee's which I just ordered. I recommend this product highly.
-
Pipe Insulation Fast & Easy
I had old asbestos insulation removed from my steam pipes. Chose to use 1-inch thick fiberglass. The jackets provided by BIP made the job go very quickly and easily. They also provided tape segments for the joints. The fiberglass was well made, easily cut or hollowed out to fit around pipe connections. They have several videos on line that show the proper way to install the jackets, angles and elbows also the sizing charts took out the guess work. Reasonably priced compared to the national retail stores and showed up at my door within 3 days of placing the order. Definitely would recommend to anyone needing to insulate pipes. Would recommend picking up an extra roll of tape.
-
Well made product that will save us lots of money
I purchased this pipe insulation for the long runs in my basement from the boiler to our radiators. First, each piece was very easy to install, Just pull up the tape, spread it open, wrap it around the pipe and seal the tape. Second, they look great. By the way, I used an old bread knife to cut pieces to length as needed.
I was especially appreciative of pieces of tape that came with to seal up the seams between pieces. Made it look like one continuous piece of insulation. Looks very professional.
Finally, and most important, the insulation works great. I used a temperature sensor to compare pipe I did not insulate with the pipe I did. The naked pipe was 135 to 145 degrees. The insulation was 75-80 degrees. That is an amazing improvement and I expect a nice cost saving.
Thanks to BuyInsulationProducts.com for the great solution and service.
*Rudy, thank you for the great review and enjoy those lower utility bills! ~ BIP -
Owens Corning fiber glass insulation.
Great company that sells insulating products.
Accurate web site that has charts for you to decide. Tutorials are great. The products that I purchased were excellent. They were shipped promptly and was everything I expected.
I will absolutely purchase from this company again. -
easy install good results
Great product, the double sided joint tape makes for a much improved install over my local supplier.
-
Great quality
Don't bother with the "Home Depot Cheapo" junk if you want it to stay on. Plus, how can you beat next day delivery?
