Proto / JM / Speedline
PVC Pipe Fitting Covers are used as an efficient and easy way to provide thermal insulation to hard-to-insulate pipe fittings. While pipe insulation fittings are mainly installed for thermal insulation purposes, they also provide a clean and professional appearance compared to alternative fitting insulation methods.
Buy Insulation Products stocks every PVC Fitting Cover made in all of the pipe sizes and insulation thicknesses sold in the store. These PVC Pipe Fitting Covers range from the standard 90° & 45° degree elbow covers to hard to find P-Trap Covers and Wye-Strainers. Most pipe insulation fitting covers come with a fiberglass insert wrap which is first wrapped around the bare pipe fitting before the PVC cover is installed.
Buy Insulation Products offers specialty Color PVC Fitting Covers and Jacketing. Select from 13 high gloss vibrant colors to make your insulation project stand out, or blend in with existing color motifs.
Please take a minute to review all of our PVC Fittings online, which are supplied by the Top 3 American PVC Manufacturers: Johns Manville (Zeston), Proto, and Speedline.
PVC Product Offering:
PVC 90° Degree Elbow Fitting Covers: These PVC fitting covers are one of the most popular PVC fitting covers we sell. Every piping system has atleast one 90° degree fitting that needs to be properly insulated. The PVC 90° Degree Elbow Fitting Covers provide thermal insulation as well as gives your system a neat, clean, and professional appearance.
PVC 45° Degree Elbow Fitting Covers: Just like the PVC 90° Degree Elbow Covers, the PVC 45° Degree Elbow Fitting Covers are used to insulate basic 45° elbows included in your piping system. 45° degree elbow fittings are less popular than the 90° elbows, but some pipe installations require a double 45° pipe adjustment on the height or alignment so a few will likely show up in your system.
PVC Tee/Valve Fitting Covers: The PVC Tee/Valve Fitting Covers are named Tee/Valve because the cover's shape is designed for a pipe tee fitting, but it can also be used to cover small body valves. Tee fittings are very common in piping systems that have a main pipe that branches off to smaller piping, such as a boiler supply line that branches off to each radiator line.
PVC Reducer Fitting Covers: We offer reducer fitting covers for 90° elbows, 45° elbows, and tees. When a pipe reduces size through a pipe fitting, a standard PVC fitting cover will not sit correctly as both ends are sized the same. PVC Reducer Fittings have end step downs which can be trimmed to fit different pipe sizes on all points. These reducer fittings can make a difficult insulation project a lot easier.
PVC Cut & Curl Jacketing: PVC Cut & Curl Jacketing is a three foot wide PVC sheet which is cut to size and heat curled to fit over the circumference of the pipe insulation. PVC Jacketing comes with SSL - Self-Sealing Lap for a quick and easy closure. PVC Cut & Curl Jacketing if sealed properly will protect pipe insulation from weather/UV.
PVC Union Covers: PVC Union Covers are a two piece fitting that easily steps up the pipe insulation to fit over a pipe union connector joint fitting.
PVC End Cap Covers: PVC End Caps are circular/oval shaped PVC covers with an approximately 1" tall rim. Most of these covers come pre-slit from ZESTON to allow a quick and easy install as a pipe cap at the system's end. PVC End Caps can be used for a variety of application including pipe size step downs (reducers) or to cap a barrel over a flange, etc.
PVC Victaulic / Mechanical Groove Step Down Fitting Covers: PVC Victaulic Fitting Covers are available in 90° Degree Elbow Covers, 45° Degree Elbow Covers, Tee Covers, and Victaulic Coupling Covers. Victaulic 90°, 45°, and Tee covers are two piece fittings that have step down ends which means the same fitting cover can be fabricated to fit multiple insulation thicknesses (standard covers go from 1/2" up to 2" thickness).
PVC Line Flange Covers: PVC Line Flange Covers (LFC) are used to fit over large flanges that exceed the outer diameter of the pipe insulation installed on the pipe system. PVC LFC covers are two piece fittings and have a slight size adjustment with overlapping the halves.
PVC P-Trap Covers: PVC P-Trap Covers are two piece fittings that fit the P shape of a drain pipe's P-Trap. Buy Insulation Products.com stocks all available sizes that are made by the manufacturers.
PVC Y-Strainer Covers: PVC Y-Strainer Covers (Wye Covers) are a one piece fitting that is similar to the PVC Tee/Valve Cover. The PVC Y-Strainer cover is simply wrapped over the already insulated wye pipe fitting or strainer.
PVC Long Radius 90° Elbow Fitting Covers: PVC LR 90° Degree Elbow Covers are used to fit over long radius sweep pipe elbows that standard PVC 90° Degree Cover Fittings cannot. To order PVC LR 90° covers, the pipe size and insulation thickness must be selected as they are not sized with standard PVC sizes.
PVC Roof Drain / Sump Covers: PVC Roof Drain Covers are designed to insulate the bell of a roof drain near the roof deck to insulate and prevent condensation.