Metacaulk 150+ Firestop Sealant

Metacaulk 150+ is a one component, general purpose fire rated sealant and smoke seal for construction joints and through penetrations. Metacaulk 150+ is a water based, non-sag caulking grade sealant that is easy to apply as well as to retrofit. It cures to an elastomeric seal that is suitable where dynamic movement is expected. In the event of a fire, Metacaulk 150+ will prevent the spread of flames, smoke, hot gases and water through joint openings and through-penetrations. No dilution or mixing is required for use. No special skills are necessary for installation. Metacaulk 150+ intumescent fire caulk is applied with a conventional caulking gun, bulk loading gun or can be troweled from the pail. For large applications, it can be pumped directly from the pail. Metacaulk 150+ systems are rated for 1 and 2 hours in accordance with ASTM E814 (UL1479) and ASTM E1966 (UL 2079) test standards.

APPLICATIONS:

Metacaulk 150+ intumescent fire caulk can be used in interior applications as a general purpose fire rated sealant and smoke seal for construction joints on both vertical and horizontal surfaces. Metacaulk 150+ is also an excellent fire rated acoustical sealant and can be used in areas under constant vibration or movement. Metacaulk 150+ can also be used on various penetrations such as EMT, telephone & power cables in concrete floors and walls, gypsum walls as well as wood floors. Use this intumescent fire caulk to prevent the spread of fire and smoke through joints in fire rated gypsum wallboard partitions, concrete block or concrete walls and/ or concrete or corrugated steel deck floor/ceiling assemblies.

Metacaulk 150+ is available in 10.3 oz Tubes and  5 Gallon Pails.

RECTORSEAL METACAULK 150+ FIRESTOP DATASHEET