Understanding Fiberglass Insulation R-Value Rating Chart
Posted by BIP on 27th May 2021
R-Values for Fiberglass Pipe Insulation
When looking at different types of pipe insulation you will find a lot of conflicting information on the R-Values that are listed. Most sites will list a generic R-Value for a wall thickness, like 1/2" thickness gives an R-3, 1" thickness gives you an R-6, etc. This type of amateurish simplification which is both misleading and incorrect. In reality the fiberglass insulation ratings vary on not only wall thickness but most importantly, the pipe size. See our R-Value blog post below for more details on understanding and calculating R-Value for Fiberglass Pipe Insulation.
1. What is the basic definition of R-Value?
In very basic terms, R-Value of fiberglass pipe insulation can be thought of as Insulating Power or Thermal Resistance. The higher the
2. Why Calculating R-Values for Pipe Insulation is different from Building Insulation (flat insulation).
Building Insulation is flat which allows the R-Value to be determined by the actual thickness of the insulation. Pipe Insulation is curved, so the surface area changes depending on the insulation thickness and the size of the pipe. The smaller the pipe and the thicker the insulation, the larger the amount of insulation in that space. In the diagram below, we attempt to show two pipes both insulated with 1" thick insulation. As you can see, a smaller pipe will have a larger insulation area based on the difference between the surface area of the outside of the insulation compared to the surface area of the pipe. The larger pipe will have an area that is very flat which makes the difference in surface areas almost nil and close to 1".
3. Why R-Values for Fiberglass Pipe Insulation differ for different pipe sizes.
As shown in the diagram above, the "Equivalent Thickness" is larger for the smaller pipe.
For example 1 x 1 pipe insulation will have an equivalent thickness of 1.541" while 5 x 1 will have an equivalent thickness of 1.104". The 5 x 1 insulation will be more flat and closer to 1" than 1 x 1 which is almost like having 1-1/2" of flat insulation on it due to the comparison of the pipe size.
4. Why R-Values between different types of pipe insulation products differ based on mean temperature.
The standard insulation R-value is broken down into two factors; a.) the thickness of the insulation and b.) the K-Value of the insulation type at the mean temperature. The lower the K-Value for an insulation material at a certain mean temperature, the better. K-Values will vary based on the mean temperature ( For example, at a mean temperature of 100°, Fiberglass will have a K-.24 while at 400°, Fiberglass will have a higher K of .39. So the R-Value of fiberglass at 100° will be higher than it's R-Value at 400°.
GLOSSARY:
Mean Temperature = When we discuss the mean temperature, this is the temperature of the pipe and the temperature of the ambient air (room temp) added together and divided by two.
For Example: An exhaust pipe has a temperature of 325° and the room temperature is 75°, the mean temperature would be 400/2 = 200°.
K-Value = K-Value is based on the insulation material type and the mean temperature. The lower the K-Value the better the R-Value will be.
Equivalent Thickness = Equivalent thickness is that thickness of insulation, which, if installed on a flat surface, would yield a heat flux equal to that at the outer surface of the cylindrical geometry.
EQUIVALENT THICKNESS LIMITS
The following will show the pipe size per insulation thickness where the equivalent thickness transcends back to the actual insulation thickness. Most pipe sizes smaller than the ones posted below will have an equivalent thickness that is greater than the actual pipe insulation thickness.
1/2" thick = 2 x 1/2 and below
1" thick = 4 x 1 and below
1-1/2" thick = 12 x 1-1/2 and below
2" thick = 16 x 2 and below
INSULATION R-VALUES CHART AT 75° FOR BUYINSULATIONPRODUCTS.COM FIBERGLASS PIPE INSULATION
PIPE INSULATION THICKNESS
|
BIP Pipe Size |
1/2" | 1" | 1-1/2" | 2" |
|
1/2
|
R 3.1
|
R 6.8
|
R 12.4
|
R 18 |
| 3/4 | R 2.9 | R 5.4 | R 10.4 | R 15.5 |
| 1 | R 2.8 | R 6.7 | R 11.1 | R 16.3 |
| 1-1/4 | R 2.7 | R 5.2 | R 11.3 | R 13.8 |
| 1-1/2 | R 2.6 | R 5.8 | R 9.8 | R 17 |
| 2 | R 2.6 | R 5.9 | R 9.8 | R 14.2 |
| 2-1/2 | R 2.5 | R 5.6 | R 11.5 | R 15.6 |
| 3 | R 2.5 | R 5.2 | R 8.7 | R 12.4 |
| 4 | R 2.4 | R 5.2 | R 8.3 | R 11.7 |
| 5 | N/A | R 4.8 | R 7.8 | R 11.0 |
| 6 | N/A | R 4.6 | R 7.4 | R 10.9 |
| 8 | N/A | R 4.7 | R 7.4 | R 10.3 |
| 10 | N/A | R 4.2 | R 7.5 | R 10.3 |
| 12 | N/A | R 4.8 | R 7.4 | R 10.1 |
*R-Values listed above are specific to fiberglass pipe insulation sold by www.BuyInsulationProductStore.com
*Please contact us for any other R-Value info at customerservice@buyinsulationproductstore.com
We have found that certain Energy Codes/Rebates specify R-Values for pipe insulation:
If you purchased Fiberglass Pipe Insulation from BuyInsulationProducts.com and need help with Energy Rebates regarding R-Value, please use the chart above. We can also provide documentation if needed for receiving your rebate.
