Aerofix Insulated Pipe Supports

Aerofix insulated pipe supports help maintain both the thermal performance and vapor barrier of rubber pipe insulation systems at the support points.  Aerofix pipe supports consist of a rigid polymeric core that is lined with closed-cell EPDM foam rubber and encased with a zero-perm, weather-proof and corrosion-proof EPDM membrane.  Aerofix pipe supports have a built-in self-seal ProTape closure to ensure seamless EPDM protection and fast and easy install.

FEATURES:

• Wide Temperature Range: -328°F to 257°F
• Thermal Conductivity: K = 0.245 (Btu·in./hr·ft2·°F)
• Water Vapor Permeability (Perm-inch): 0.00
• Compatible for use with Pipe Shields
• Self-Extinguishing (ASTM D635)

BENEFITS:

• Extreme High Strength - easily bears heavy loads without crushing
• Fully air-tight solution - maintains vapor and moisture barriers
• Environmental Product Declaration (EPD)
• Health Product Declaration (HPD)
• Indoor Advantage™ Gold Certified for low chemical emissions
• Prevents thermal bridging
• Reduces potential for under-insulation corrosion (CUI)
• Saves installation labor - no field fabrication required
• UV Resistant
• Absorbs pipe vibration
• Works with common pipe hanger systems (clevis, strut channel, pipe  clamps, etc.)

SIZING:

Please read the following instructions to determine the correct size Aerofix pipe support to order.  Please feel free to contact us for help or to double check your selected sizes.
There are two options to select, the pipe size and the insulation thickness.  The insulation thickness refers to the wall thickness which should match the thickness of rubber pipe insulation being installed on the pipe.  This can range from 1/2" up to 2" thickness.

The next is the Pipe Size which is described first by the Pipe OD (Outer Diameter) that the pipe support will fit on.  Next in parenthesis will be the CT= Copper Tube ID (Inner Diameter) and then IPS= Iron Pipe Size ID (Inner Diameter)

For Example:  7/8 in. (3/4 CT | 1/2 IPS)
This pipe support fits a pipe with a 7/8 inch OD (the outer diameter of the pipe).
3/4 CT refers to this fitting a 3/4 inch Copper Tube Size (ID)
1/2 IPS refers to this fitting a 1/2 inch Iron Pipe Size (ID)