Fiberglass Pipe Insulation
Brand : Owens Corning / Johns Manville
- SKU:
- 0100000
- Unit Of Measure:
- Per 3ft Section
- Size is NOT Diameter:
- Refer to Sizing Instructions
Fiberglass Pipe Insulation covering is intended as a thermal insulation for both hot and cold service piping from -20°F to 1000°F. The pipe insulation is molded from heavy density resin bonded glass fibers that come in 3 foot long hinged sections. The fiberglass is wrapped with white All-Service Jacketing with a self-sealing lap (ASJ/SSL) for a quick and secure installation. Each 3 foot section of commercial hot and cold pipe insulation comes with a butt-strip tape (matching the white ASJ jacketing) that is used to connect two sections of fiberglass pipe insulation covering together.
Fiberglass Pipe Wrap Uses:
- Domestic Hot & Cold Water Pipes
- Hot Water Heating Pipes
- High Temperature Pipes
- Dual Temperature Pipes
- Steam Pipes (Low to High Pressure)
- Condensate Lines
- Refrigerated / Chilled Liquid Pipes
Choosing The Correct Size: There are two sizes you need to choose when ordering fiberglass pipe insulation, the "Pipe Size" and the "Insulation Thickness". The insulation thickness is the wall thickness of the fiberglass which varies from 1/2" up to 3" thick. For help selecting a fiberglass pipe insulation thickness see our Fiberglass Thickness Guide To determine which Pipe Size to order please see the link below (Note: Pipe Size is NOT the same as the pipe diameter):
CLICK HERE FOR PIPE SIZING CHART AND INSTRUCTIONS
Installation Instructions:
To install hot and cold pipe covering, simply open the hinged part of the commercial pipe insulation and place the opening over the pipe. The fiberglass piping insulation covering will self-close around the pipe. Once the fiberglass is fitted snug around the pipe, peel the release paper from the self-sealing lap and press the ASJ/SSL jacket closed from the middle towards the edges of the pipe insulation. Make sure to rub the jacket closed to ensure a secure seal. Seal two sections together with a piece of butt strip tape making sure to rub the tape to create a secure seal. Additional ASJ MAX Tape is recommended for large projects and projects that require multiple cuts of the insulation. Use of PVC Fitting Covers for elbows, tees, unions and other pipe fittings should be installed after installing fiberglass pipe insulation.
For more information: Fiberglass Pipe Insulation Datasheet
VIDEO: HOW TO INSTALL FIBERGLASS PIPE INSULATION
White ASJ Jacketing: A large majority of common size fiberglass pipe wrap insulation we ship is the new ASJ Max / HP ULTRA pipe insulation while some larger sizes and (3 x 1/2, 3-1/8 x 1/2, 4 x 1/2, and 4-1/8 x 1/2) will be Johns Manville Micro-Loc HP. The new ASJ Max / HP ULTRA jacketing has a poly top-coat over the ASJ paper which makes it easier to wipe clean and slightly water resistant (cannot be left exposed outdoors).
NOTE: Each unit is 3 linear feet of pipe covering. For example, if you need 9 linear feet, you only need to order 3 units.
BUY INSULATION PRODUCTS.COM ONLY SELLS AMERICAN MADE FIBERGLASS PIPE INSULATION PRODUCTS. DEPENDING ON SHIP TO LOCATION AND/OR PIPE SIZE WE MAY SHIP OWENS CORNING ASJ MAX OR JOHNS MANVILLE MICRO-LOC HP / HP ULTRA INSULATION. PLEASE CONTACT US WITH ANY QUESTIONS.
|
|
|
 |
|
|
|
|
|
|
-
Great product, Great delivery
I am so happy I found Buyinsulationproducts.com. To be able to get this type of product, which is not locally available, and get it delivered so quickly is perfect. You can't do better.
-
Thanks...
I just wanted to drop you a quick note and say thanks for helping me make my home steam pipe insulation project worry free. Your web site makes pipe sizing and quantity ordering simple and accurate. Even small suggestions like recommending buying an extra roll of tape for the seams was right on the money. Your quick delivery was much appreciated as well. I'm not one to normally send a letter of appreciation, but as far as I'm concerned your company is top notch and my project came out great because of it.
-
Works really well
Sturdy, good adhesive, easy to install. Amazingly fast shipping.
I really recommend the instructional videos on this site too - they're really helpful, well produced, and clear. -
Great quality, fast service
All of our orders from this company have been great quality, accurately filled and fast delivery.
-
Easy to install
This is the second time I have used the pipe insulation and it is great, easy to cut where needed and install. It is great that it comes in several thicknesses for all pipe sizes. The big box stores only have one size and thickness. Coupled with the PVC elbows, it makes a very professional looking job. Delivery on both occasions was very fast.
-
Excellent product
Good quality and ease of installation makes this an excellent product. I plan to buy more. Ordering is easy and shipping is very fast.
-
Pipe insulation well worth it
The installation was super-easy except when some cutting and fitting was needed, but that wasn't hard to do after a little practice.
A few of the units (maybe 6 of 24) had the openings for the wrapper and the fiberglass misaligned by a lot. No big deal, just a little inconvenient.
The insulation is extremely effective! We have lots of heating pipes in the furnace room and the adjoining basement room. I used 24 at size 3 and 10 at size 2. I skipped the size 1. The room is a lot cooler, and I'm hearing that the upstairs is warmer. So mission accomplished.
*Roger, glad to hear you are heating the upstairs rather than the basement! ~ BIP -
Great Product
Great speedy delivery and came as expected. Must get additional tape though as the tape that comes with this on the tube will open up on its own due to heat.
*Please note that the ASJ Max tape and complimentary joint tape have an acrylic adhesive which requires pressure to be applied (rubbed) at time of use. Rubbing the tape will break the acrylic crystals and allow the tape to adhere as designed. If you find that the joint tape is popping open, simply rub it in. ~BIP -
Fiberglass Pipe Insulation
This product was very easy to install. Looks good and insulates well.
-
Great product, great company.
I am in the process of insulating the steam pipes in my house, and this product has been performing great! Installs easily, and the adhesive strips seem to hold up very well.
Shipping is FAST, appreciate that a lot. thanks!!!
*Adam, we are glad you are happy with our service and products! ~BIP -
How can you beat this combination:
Good Product: Made in USA: Huge Product Selection: Instructions: Instructional videos: Prompt Answers to e-mail Questions; Fast Delivery; and not in the least, the Best Price I could find. How can you beat that?
*Art, thank you for the compliments, we really appreciate them! ~BIP -
Insulation pipe and ASJ Max Tape
I would strongly recommend using this insulation and tape from Buy Insulation Products.com.
Products are made from high quality and a priced great.
Thank you for the great products
