2" Stand-Off Impaler Brackets

2" Stand-Off Impaling Clips for acoustic panels are used for installing acoustic panels on walls while maintaining a 2" air space between the back of the panel and the wall.  These impaling clips for acoustic panels have 4 angled prongs (1" long) that stick into the fiberglass panel backing and hold the panel firmly in place.  The Stand-Off brackets are installed on the wall with 2 to 4 drywall screws (not included).  4 Stand-Off Impaler brackets are recommended per standard 2' x 4' panel making sure one impaling bracket is placed in each corner. 
2" Stand-Off Impaler Brackets come in packs of 8 pieces (enough for 2 panels).

INSTRUCTIONS:
1.   Determine the location of your panel and have one person hold it up in place while the other person makes a light mark on the wall to show all 4 corners.

2.   Attach 4 Stand-Off Impaler Brackets approx 4" off each corner edge.  The Stand-Off brackets should be screwed into the studs, so moving the brackets a little to hit a stud is recommended.  If screwing into a stud is not possible, use a drywall anchor type screw to ensure a proper hold.

3.  While using a level on the top of the panel, line up the acoustic panel and when ready, press the acoustic panel downward onto the Impaler brackets until you the panel touches the wall.


METROFLEX 2" STAND-OFF IMPALER BRACKETS DATASHEET