1/2" Aluminum Straps with Seals attached cut to size. Fab Straps are used as a closure system for Aluminum Pipe Jacketing and Aluminum Fitting Covers. Fab Straps are made out of 1/2" Aluminum Banding and have a 1/2" Aluminum Seal attached at the end.
INSTALL:
1. Put the Fab Strap around the Aluminum Jacketing
2. Pull the insulation strap through the opening in the seal
3. Pull tight and bend the strap back over the seal
4. Close the 2 prongs to seal the strap and trim
These aluminum pipe straps are sized the same as our Aluminum Jacketing, so if you have a #5 Aluminum Jacket, you would order Fab Strap Size #1-7 (fits sizes #1 up to #7)
QUANTITY CALCULATION:
We recommend 2 Insulation Straps per 3ft section of aluminum Jacket. One in the middle of the section and another on the overlap between sections.
Example: If you order 20 sections (60ft) of aluminum jacket we recommend 40 Fab-Straps.
We also recommend 2 Fab-Straps per Aluminum 90 or 45 Fitting Cover and 3 Fab-Straps per Aluminum Tee Cover.
Click below to determine the size Fab Strap to order:
FAB STRAP SIZE CHART
-
Aluminum Straps
These straps are easy to use and being pre cut to the correct size is not only a time saver but ensures a quality look
-
1/2" fab straps
Worked great
-
Easy applicaton
Worked good, excellent service
-
Great customer service
Worked out great thank you for your help
-
good product and service
Excellent product and service
